As part of my CoreXY Toolchanging build, I need a number of extruders. I wanted to explore the different options available. As great as the E3D Hemera looks, I can’t justify the £108 cost per extruder (and for my CoreXY I need 6) when I wouldn’t need all the added benefits for every extruder.

I had a look around on my favourite source of parts (Aliexpress) and found the Mellow BMG Extruder. I’ve had my eye on Mellow branded items for a while now as they seem to be up and coming in the cheap knockoff world. They have even cloned the Mosquito Hot End, which so far seems to be reviewing well and at some point I may well order one.

I ordered the Set 2, which comes with the extruder and the motor. Everything came nicely wrapped in a polystyrene box. The main body is injection moulded, as is the larger driving gear. The machining of the teeth on the gears look good and I am generally happy. The purple piece in the photo below held the gear which fits to the extruder in place which I thought was a nice little touch, and is not needed for every day use. The plastic gear has also been mounted centrally on the shaft so rotates correctly when installed. It looks as though Mellow have decent quality control.

In the kit you get all of the tools required to fit the extruder as well as the fitting to allow it to be used in bowden mode. I will be using this extruder in direct mode. There are also two lengths of screws to be used to fit it either directly to the motor or with a mount in between.

I only had one issue with the extruder in that the way I mount it on my machine. The BMG clone when assembled is slightly thicker due to the name badge and the “waves” that have been moulded into the plastic in the front. So I had to spend a little time sanding the front down to get it to fit in my custom mount.

I have yet to print with it (still assembling the printer) but at the moment, the Mellow BMG clone definitely looks like a very good purchase.